What Common Electronic Device Was Once Remote Controlled By Ultrasound?
Answer: TelevisionsGet anyone who came of age in the early days of television to talk about their family’s first television set and you’re bound to hear stories about children sent scurrying across the living room to change the channel using the controls on the front of the set. In those days, there were no remotes to speak of, and if you wanted to watch another of the handful of stations available in your area, then you had to get up and change the channel on the set itself.
All that changed when the first, albeit unpopular, television remote came along. The first television remote was released in 1950 and was, unimaginable to a modern consumer, tethered directly to the television set by a cable that snaked across the living room to the viewer’s chair. Despite the increase in convenience, very few people wanted a semi-permanent cable installation in their living room. Zenith, the same television company responsible for introducing the aforementioned wired remotes, spent the first half of the 1950s working on a wireless version. Radio-based remotes were proposed, but ultimately never saw use outside of the lab thanks to the poor quality of 1950s era radio receivers. It simply wasn’t practical or efficient to use radio frequencies for remote control at the time.
If not radio waves, then what? If you guessed infrared, you’d be well informed about the mechanics of modern remotes, but off base in guessing how the first wireless remote functioned. Modern remote controls use infrared pulses to control televisions and peripheral equipment, but infrared didn’t start appearing in consumer products until the early 1980s. Bluetooth remotes as a standard feature would be another thirty years off from that, even.
The first wireless television remote control instead used ultrasonic frequencies to control the television set. The bulky remote housed a series of bars that were struck by the buttons with a loud click (thus the term “clicker” to refer to remote controls) and fired ultrasonic waves out the front of the remote. The design of ultrasonic remotes was refined with the introduction of more compact electronics. Later models contained piezoelectric crystals, configured in a sort of electronic tuning-fork-like apparatus, that issued specific frequencies for various functions (like changing the channel up or down, adjusting the volume, and turning the power on or off). The receiver housed a microphone that picked up on the frequencies and made the adjustments to the television set.
The design was not without shortcomings, however. Some people with very sensitive high-frequency hearing could hear the remote (much to their annoyance), dogs were reported to be less than fond of the devices, and natural sounds from the environment could cause the receiver to malfunction.
Ultrasonic remotes were eventually phased out in favor of infrared remotes which generated no sound and were radically less susceptible to environmental interference. Although radio-frequency based remotes were impractical in the 1950s, high-end remote manufacturers would return to the concept decades later with much success. Today, the majority of remote control functions in domestic electronics are handled by infrared, radio frequency, or a combination of the two.
The Real-Life Inspiration For The Super Friends’ Hall Of Justice Is Located In?
The Rosetta Stone Is Inscribed With A Decree Regarding?
Which Video Game Was The First To Feature A Female Protagonist?
The Only Country In The World With A Non-Rectangular Flag Is?
To Assist With Construction Of The Saturn V Rockets, Which Of These Groups Was Brought In As Consultants?
What Company Did Google Almost Sell Out To For Less Than A Million Dollars?
Besides Humans, The Only Other Animal With A Chin Is The?
Which Of These Popular Novels Began Life As A Radio Show?